Lufft Digital-Analog-Converter DACON8-UMB

The Lufft-DACON8-UMB (Digital-Analog- Converter) converts up to eight channels into analog output signals. The converter can be used with one or a combination of different UMB sensors. The Lufft-DACON8-UMB uses the UMB protocol of the sensors to read the data and converts the digital data into voltage or current output. In case of having only one Lufft UMB sensor, the combination of the sensor and DACON8-UMB works without any other interface in between. If the Lufft DACON8-UMB has to convert data of more than one Lufft UMB sensor, then every UMB sensor needs a Lufft ISOCON between the sensor itself and the DACON8-UMB, and must be connected to the RS485-bus. In case there are more than eight channels requested by the application, the DACON8-UMB application can work with more than one converter. It is necessary to use one converter per DACON8-UMB.